Aluminium cube connector 3D BSB + assembly set - slot 10 | 40x40
Product details
- Profile system
- BSB
- Slot type
- 10
- Material
- Aluminium die-cast
- HS-code
- 7616.99.10.99
Specifications
- Weight [grams]
- 94.50
Description
This 3D cube connector joins three BSB profiles 40x40 with slot 10 at right angles, as a neat corner of a frame. The cube is screwed to the end of each profile through the core bore, and black cover caps close the screw bores afterwards.
The self-forming screws make their own thread in the core bore, so no tapping is needed.
- Material: aluminium die-cast, plain, alu colour
- Cover caps: plastic (PA), black
- Edge length: 40 mm
- Assembly set included: 3 self-forming screws S12 x 30, Torx T50, zinc plated
- For BSB profiles 40x40, slot 10
How to mount a cube connector
Example: BSB cube connector 40 2D on two 40x40 slot 10 profiles. The 3D version works the same, with a third profile and a third screw.
-
Step 1: Put the cube on the upright profile and push the horizontal profile against it. The lugs drop into the slots.
-
Step 2: Put a screw in each hole. It goes through the cube into the core bore of the profile.
-
Step 3: Tighten both screws with a Torx key. They form their own thread, no tapping needed.
-
Step 4: Press the cover caps into the holes. Done.
Compare variants
Not sure which variant fits best? Compare the 40 × 40 mm variants of BSB slot 10.
Downloads
CAD files and documentation — download directly, no registration required.