Pivot joint 45 with locking lever - slot -/8/10 | 45x45
Product details
- Profile system
- NRB
- Slot type
- -/8/10
- Material
- Zinc die-cast
- Finish
- Laquered
- HS-code
- 7907.00.00.90
Specifications
- Weight [grams]
- 387
Description
This pivot joint 45 with locking lever makes a hinged connection between two profiles or panels, which you can fix at any angle. With the screws and the locking lever you set how easily it turns, or lock it in one position.
On a profile end with a Ø10.2 mm core bore, a threaded insert reduces the bore to M8 for mounting.
- Material: zinc die-cast, powder coated, alu colour
- Locking lever: glass fibre reinforced plastic (PA)
- Opening angle: 178°
- Separate locating pins for slot 8 and slot 10
How to mount a pivot joint 45x45
BSB pivot joint 45x45 slot 10 with assembly set: a threaded insert and M8 screw in the core bore of one profile, a hammer nut in the slot of the other.
-
Step 1: Screw the threaded insert S12 / M8 into the core bore of the first profile until it is all the way in.
-
Step 2: Screw the joint onto the end face with the M8x20 screw into the insert. The centring pieces drop into the slots.
-
Step 3: Turn the hammer nut loosely onto the M8x16 screw and put the joint on the second profile, the nut in the slot.
-
Step 4: Tighten the screw with a hex key. The hammer nut turns across and clamps in the slot.
-
Step 5: Set the joint at the angle you want and tighten the screws in the hinge, or lock the clamping lever.
Compare variants
Not sure which variant fits best? Compare the 45 × 45 mm variants of NRB slot -/8/10.
Downloads
CAD files and documentation — download directly, no registration required.