Swivel castor L-serie Ø125 with bolt hole Ø12.5

This swivel castor from the L series turns on a double ball bearing in the swivel head, so a frame or trolley steers easily. The fork is pressed, zinc-plated steel with a bolted axle; the wheel runs on a plain bearing.

You fix it with a standard screw through the Ø13 mm bolt hole, in the slot or in the centre bore of an aluminium profile. The grey thermoplastic rubber tread leaves no marks on the floor.

• Wheel: Ø125 mm, 32 mm wide, polypropylene centre
• Overall height: 160 mm
• Load capacity: 100 kg dynamic, 200 kg static
• Fixing: bolt hole Ø13 mm
• Swivel circle: Ø207 mm