T-connector BSB + assembly set - slot 8 | 30x30
Product details
- Profile system
- BSB
- Slot type
- 8
- Material
- Aluminium die-cast
- HS-code
- 7616.99.10.99
Specifications
- Weight [grams]
- 52
Description
This T-connector is a die-cast plate that joins two BSB profiles 30x30 with slot 8 in a T-joint: the end of one profile against the side of the other.
- Material: aluminium die-cast, plain, alu colour
- Plate width: 30 mm
- Assembly set included: 1 screw M8 x 30 and 2 screws M5 x 16 (DIN 7984), 2 hammer nuts M5 for slot 8, zinc plated
- For BSB profiles 30x30, slot 8
How to mount a T-connector
Example: BSB T-connector 45x45 for slot 10: the end of one profile at right angles to the side of the other, no drilling, with a central screw, two socket head screws and two hammer nuts.
-
Step 1: Put two bolts in the T-connector. Screw it onto the profile end with the central screw; no tapping needed.
-
Step 2: Turn a hammer nut a few turns onto the bottom of both screws, both facing the same way.
-
Step 3: Place the profile with the connector on the other profile. The hammer nuts drop lengthwise into the slot.
-
Step 4: Tighten both screws; you reach the heads through the slot. The hammer nuts turn across and clamp in the slot.
Compare variants
Not sure which variant fits best? Compare the 30 × 30 mm variants of BSB slot 8.
Downloads
CAD files and documentation — download directly, no registration required.