T-connector BSB - slot 10 | 40x40
Product details
- Profile system
- BSB
- Slot type
- 10
- Material
- Aluminium die-cast
- HS-code
- 7616.99.10.99
Specifications
- Weight [grams]
- 39
Description
This T-connector is a die-cast plate that joins two BSB profiles 40x40 with slot 10 in a T-joint: the end of one profile against the side of the other.
- Material: aluminium die-cast, plain, alu colour
- Plate width: 40 mm
- Screws not included; also available with assembly set
- For BSB profiles 40x40, slot 10
How to mount a T-connector
Example: BSB T-connector 45x45 for slot 10: the end of one profile at right angles to the side of the other, no drilling, with a central screw, two socket head screws and two hammer nuts.
-
Step 1: Put two bolts in the T-connector. Screw it onto the profile end with the central screw; no tapping needed.
-
Step 2: Turn a hammer nut a few turns onto the bottom of both screws, both facing the same way.
-
Step 3: Place the profile with the connector on the other profile. The hammer nuts drop lengthwise into the slot.
-
Step 4: Tighten both screws; you reach the heads through the slot. The hammer nuts turn across and clamp in the slot.
Compare variants
Not sure which variant fits best? Compare the 40 × 40 mm variants of BSB slot 10.
Downloads
CAD files and documentation — download directly, no registration required.