Aluminium cube connector 2D BSB + assembly set3 - slot 8 | 30x30
Product details
- Profile system
- BSB
- Slot type
- 8
- Material
- Aluminium die-cast
- HS-code
- 7616.99.10.99
Specifications
- Weight [grams]
- 38.50
Description
This 2D cube connector joins two BSB profiles 30x30 with slot 8 at right angles, as a neat corner of a frame. The cube is screwed to the end of each profile through the core bore, and black cover caps close the screw bores afterwards.
The self-forming screws make their own thread in the core bore, so no tapping is needed.
- Material: aluminium die-cast, plain, alu colour
- Cover caps: plastic (PA), black
- Edge length: 30 mm
- Assembly set included: 2 self-forming screws S8 x 25, hex key size 5, zinc plated
- For BSB profiles 30x30, slot 8
How to mount a cube connector
Example: BSB cube connector 40 2D on two 40x40 slot 10 profiles. The 3D version works the same, with a third profile and a third screw.
-
Step 1: Put the cube on the upright profile and push the horizontal profile against it. The lugs drop into the slots.
-
Step 2: Put a screw in each hole. It goes through the cube into the core bore of the profile.
-
Step 3: Tighten both screws with a Torx key. They form their own thread, no tapping needed.
-
Step 4: Press the cover caps into the holes. Done.
Compare variants
Not sure which variant fits best? Compare the 30 × 30 mm variants of BSB slot 8.
Downloads
CAD files and documentation — download directly, no registration required.