Pivot joint 30 BSB with locking lever - slot 8 | 30x30
Product details
- Profielsysteem
- NRB
- Sleuf type
- 8
- Materiaal
- Zinc die-cast
- Afwerking
- Laquered
- HS-code
- 7907.00.00.90
Specifications
- Weight [grams]
- 156
Description
This pivot joint 30 with locking lever makes a hinged connection between two profiles or panels, which you can fix at any angle. With the screws and the locking lever you set how easily it turns, or lock it in one position.
- Material: zinc die-cast, powder coated, alu colour
- Locking lever: glass fibre reinforced plastic (PA)
- Opening angle: 182°
- Fixed locating pins for slot 8
- Mounting holes: Ø8.3 mm
How to mount a pivot joint 30x30
BSB pivot joint 30x30 slot 8 with assembly set: an M8 screw in the core bore of one profile, a slot nut in the slot of the other.
-
Step 1: Tap an M8 thread in the core bore of the first profile.
-
Step 2: Screw the joint onto the end face with the M8x20 screw. The small lips drop into the slots.
-
Step 3: Turn the slot nut loosely onto the M8x16 screw and put the joint on the second profile, the slot nut in the slot.
-
Step 4: Tighten the screw with a hex key. The slot nut clamps in the slot.
-
Step 5: Set the joint at the angle you want and tighten the screws in the hinge, or lock the clamping lever.
Compare variants
Not sure which variant fits best? Compare the 30 × 30 mm variants of NRB slot 8.
Downloads
CAD files and documentation — download directly, no registration required.