Leveling foot - bell foot base & fully threaded zps spindle - Ø45
SKU CP-060703.01.00.001
This steel leveling foot with a galvanized surface, a total length of 85 to 160 mm, and a convex base of 44 mm can be used on slightly uneven floors and is suitable for ESD electrostatic discharge.
As low as:
€2.95
€3.57
As low as:
Tip:
(calculated in the checkout)
Product Information
| Product series | STEEL SERIES |
|---|---|
| Footplate diameter [mm] | 44 |
| Product series | STEEL SERIES |
|---|---|
| Material | Zinc plated steel |
| Footplate diameter [mm] | 44 |
| Thread length [mm] | 59.30 |
| Thread diameter [mm] | M12 |
| Product series | STEEL SERIES |
|---|---|
| Material | Zinc plated steel |
| Footplate diameter [mm] | 44 |
| Thread length [mm] | 134.30 |
| Thread diameter [mm] | M12 |
| Product series | STEEL SERIES |
|---|---|
| Material | Zinc plated steel |
| Footplate diameter [mm] | 44 |
| Thread length [mm] | 118 |
| Thread diameter [mm] | M16 |
Description
This steel leveling foot with a galvanized surface, a total length of 85 to 160 mm, and a convex base of 44 mm can be used on slightly uneven floors and is suitable for ESD electrostatic discharge. The spindle with full M12 or M16 thread is supplied including a standard DIN 439 (ISO 4035) nut.