Leveling foot - bell foot base & fully threaded zps spindle - Ø90
SKU CP-060703.01.01.201
This steel leveling foot with a galvanized surface, a total length of 85 to 200 mm, and a 90 mm convex base can be used on slightly uneven floors and is suitable for ESD electrostatic discharge. The spindle with full M12 or M16 thread is supplied including a standard DIN 439 (ISO 4035) nut.
As low as:
€6.70
€8.11
As low as:
Tip:
(calculated in the checkout)
Product Information
| Product series | STEEL SERIES |
|---|---|
| Footplate diameter [mm] | 90 |
| Product series | STEEL SERIES |
|---|---|
| Material | Zinc plated steel |
| Footplate diameter [mm] | 90 |
| Thread length [mm] | 55.50 |
| Thread diameter [mm] | M16 |
| Product series | STEEL SERIES |
|---|---|
| Material | Zinc plated steel |
| Footplate diameter [mm] | 90 |
| Thread length [mm] | 115.50 |
| Thread diameter [mm] | M16 |
| Product series | STEEL SERIES |
|---|---|
| Material | Zinc plated steel |
| Footplate diameter [mm] | 90 |
| Thread length [mm] | 170.50 |
| Thread diameter [mm] | M16 |
Technical Information
| Weight [KG] | 0.31 |
|---|
| Weight [KG] | 0.39 |
|---|
| Weight [KG] | 0.47 |
|---|
Description
This steel leveling foot with a galvanized surface, a total length of 85 to 200 mm, and a 90 mm convex base can be used on slightly uneven floors and is suitable for ESD electrostatic discharge. The spindle with full M12 or M16 thread is supplied including a standard DIN 439 (ISO 4035) nut.